Volume 15, Issue 4 (Journal of Control, V.15, N.4 Winter 2022)                   JoC 2022, 15(4): 1-12 | Back to browse issues page


XML Persian Abstract Print


1- Malek Ashtar University of technology,Tehran
Abstract:   (2244 Views)
In this paper, first, using a test set on a turbocharged diesel engine in the engine test room, a nonlinear model is obtained and it is linearized around several operation points. Then, for the linear models, a linear quadratic integral Gaussian controller (LQIG) with variable parameters as function of engine speed is designed and simulated. In the proposed method, by controlling the wastegate, the boost produced by the turbocharger can be controlled at all engine speeds (especially the lower and middle speeds) with high performance response, thereby improving the output power and engine torque in all speeds. The closed loop control system is simulated and evaluated in the presence of noise and model uncertainty. The simulation results show the better performance and higher robustness in comparison with PID and LQR controllers.
Full-Text [PDF 1068 kb]   (247 Downloads)    
Type of Article: Review paper | Subject: Special
Received: 2019/12/26 | Accepted: 2020/09/26 | ePublished ahead of print: 2021/01/13 | Published: 2021/12/22

References
1. [1] p.Safarian, K.Bilen, M.Ceviz and A.Salimias, "Optimization of waste gate in the diesel engines with turbocharger," International Journal of Automotive Engineering Vol.6, Number 3, Sept 2016
2. [2] A.Karnik,J.H.Buckland and J.S. Freudenberg, "Electronic Throttle andWastegate Control for Turbocharged Gasoline Engines," American Control Conference June 8-10, 2005. Portland, OR, USA, 2005.
3. [3] M.Mansuri, "Automotive World," 30 June 2016.Available: http://memra.blogfa.com/cat-89.aspx.
4. [4] A.Y.Karnik and M.Jankovik, "IMC based wastegate control using a first order model for turbocharged gasoline engine," American Control Conference Fairmont Queen Elizabeth, Montréal, Canada, 2012. [DOI:10.1109/ACC.2012.6315144]
5. [5] Z.Qiu, J.Sun, M.Jankovik, M.Santilo, "Nonlinear internal model controller design for wastegate control of a turbocharged gasolineengine," Control Engineering Practice 46 (2016) 105-114 [DOI:10.1016/j.conengprac.2015.10.012]
6. [6] S.Samokhin, K. Zenger, "Robust and Adaptive Wastegate Control of Turbocharged Internal Combustion Engines," American Control Conference (ACC), 2014. [DOI:10.1109/ACC.2014.6859027]
7. [7] N.E. Kahveci, S.T. Impram, A. Umut Genc, "Boost Pressure Control for a Large Diesel Engine with Turbocharger," American Control Conference (ACC),Portland, Oregon, USA, 2014. [DOI:10.1109/ACC.2014.6858888]
8. [8] M.Huang, H.Nakada, K.Butts, I.Kolmanovsky, "Nonlinear Model Predictive Control of a Diesel Engine Air Path: A Comparison of Constraint Handling and Computational Strategies,"IFAC-PapersOnLine 48-23 (2015) 372-379. [DOI:10.1016/j.ifacol.2015.11.308]
9. [9] L.Eriksson, J.Wahlstr¨om, and .Klein, " Physical Modeling of Turbocharged Engines and Parameter Identification," Automotive Model Predictive Control (2010) , LNCIS 402, pp. 53-71. [DOI:10.1007/978-1-84996-071-7_4]
10. [10] P.Andersson.,"Air Charge Estimation in Turbocharged Spark Ignition Engines," Printed by LiU-Tryck, Link¨oping, Sweden, 2005.
11. [11] A.G.Kuznetsov,S.V.Kharitonov,D.S.Vornychev, "A mathematical model of a diesel engine for simulation modelling of the control system," Global Journal of Pure and Applied Mathematics., 2016. Volume 12, Number 1 (2016), pp. 213-228
12. [12] D.C.Manzie,"Input redundant internal combustion engine with linear quadratic Gaussian control and dynamic control allocation," The University of Melbourne, Melbourne, 2009. DCT doc.no.: 2009.023
13. [13] H. Jin, S. Choi and S. Kim, "Design of a compressor-power-based exhaust manifold pressure estimator for diesel engine air management," International Journal of Automotive Technology, Vol. 15, No. 2, pp. 191−201 (2014). [DOI:10.1007/s12239-014-0021-y]
14. [14] K.Rong,"Modeling of turbocharged spark ignited engine and model predictive control of hybrid turbocharger," A thesis presented to the graduate school of the university of florida in partial fulfillment of the requirements for the degree of master of science, 2014.
15. [15] م. بهروزی, ا. شامخی، ع.طوسی، م.پلاور, "مدلسازی مقدار میانگین موتور دیزل به همراه توربو شارژر," در شانزدهمین کنفرانس سالانه(بین المللی) مهندسی مکانیک ISME2008, ایران، کرمان، دانشگاه شهید باهنر, 1387.
16. [16] A.Kalbat, "Linear Quadratic Gaussian (LQG) control of wind Turbines," 3rd International Conference on Electric Power and Energy Conversion Systems, Yildiz Technical University, Istanbul, Turkey, October 2-4, 2013 [DOI:10.1109/EPECS.2013.6713053]
17. [17] J.Shin,K.Nonami, D.Fujiwara and K.Hazawa, "Model-based optimal attitude and positioning control of small-scale unmanned helicopter," Robotica / Volume 23 / Issue 01 / January 2005, pp 51 - 63 [DOI:10.1017/S026357470400092X]
18. [18] M.S.Mahmoud, A.B.Koesdwiady, "Improved digital tracking controller design for pilot-scale unmanned helicopter," Journal of the Franklin Institute 349 (2012) 42-58. [DOI:10.1016/j.jfranklin.2011.10.003]
19. [19] T.Hagglund, K.Astrom, PID Controllers: Theory,Design,and Tuning, ISA: The Instrumentation, Systems,and Automation Society, 1995.
20. [20] Graf, Jens, PID Control Fundamentals, CreateSpace Independent Publishing Platform, 2016.
21. [21] J.B. Moore, Optimal Control: Linear Quadratic Methods, Dover Publications; 91.12 edition, February 27, 2007.

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.