XML Persian Abstract Print


1- ISRC
2- KNTU
3- KNUT
Abstract:   (1117 Views)
Resonant converter due to implementation of zero voltage switching (ZVS) or zero current switching (ZCS), are very interested. Although using these techniques, increases the efficiency and also decreases the generated EMI noise, obtaining the small-signal model of these converters is very complicated. The state-space variables mostly change as a sinusoid curve, so the average of these variables is equal to zero. Therefore the traditional method such as state-space averaging is not applicable to obtaining the state space equation of the converter. In this article, the state space equation is obtained by using the extended describing functions. To verify the obtained equation, the Middle-Brook method is suggested. Employing this method, the bode-plot of the open-loop transfer function could be obtained based on the existing hardware. So an isolated series resonant converter is implemented and the required signals are measured to draw the bode-plot of the open-loop transfer function based on Middle-Brook method. Verification is performed by comparing the experimental results with simulation results.
     
Type of Article: Research paper | Subject: Special
Received: 2020/01/15 | Accepted: 2020/10/19 | ePublished ahead of print: 2020/11/3

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


© 2021 CC BY-NC 4.0 | Journal of Control

Designed & Developed by : Yektaweb