Volume 15, Issue 3 (Journal of Control, V.15, N.3 Fall 2021)                   JoC 2021, 15(3): 69-82 | Back to browse issues page


XML Persian Abstract Print


1- Imam Khomeini International University
Abstract:   (4874 Views)
A dynamic model in the d-q frame is introduced for wider coverage of the faults of three-phase induction motor. In this frame, it is possible to implement and analyze more accurately due to the evaluation of stator currents instead of rotor. In the proposed model, eccentricity and stator winding faults have been investigated. The results could cover more than 70% of the faults of the three-phase induction motor.
Full-Text [PDF 6279 kb]   (925 Downloads)    
Type of Article: Research paper | Subject: Special
Received: 2020/03/28 | Accepted: 2020/11/16 | ePublished ahead of print: 2021/01/6

References
1. A. Hajary, R. Kianinezhad, s. g. seyfossadat, A. Saffarian, and S. s. Mortazavi, "Robust Control of Symmetrical Six-Phase Induction Machine Under Open-phase Fault Condition Based on ADRC," (in eng), Journal of Control, Research paper vol. 11, no. 1, pp. 51-60, 2017. [Online]. Available: http://joc.kntu.ac.ir/article-1-387-fa.html.
2. [2] I. Boldea and S. A. Nasar, Vector control of AC drives (Vector Control of AC Drives). CRC Press (in English), 2017, pp. 1-237.
3. [3] A. Damaki, M. Amini, and M. Torabi, "Design, Analysis and Fabrication of a Counter Rotate Brushless Permanent Magnet Motor for Using in Under Water Systems," (in eng), Journal Of Marine Engineering, Research Paper vol. 13, no. 26, pp. 25-34, 2018.
4. [4] S. X. Ding, Model-based fault diagnosis techniques: Design schemes, algorithms and tools. London: Springer-Verlag, 2013.
5. [5] R. Isermann, Fault-diagnosis applications: model-based condition monitoring: Actuators, drives, machinery, plants, sensors, and fault-tolerant systems. Berlin: Heidelberg: Springer-Verlag, 2011. [DOI:10.1007/978-3-642-12767-0_12]
6. [6] M. Ojaghi, R. Aghmasheh, and M. Sabouri, "Model-based exact technique to identify type and degree of eccentricity faults in induction motors," (in English), IET Electr Power Appl, Article vol. 10, no. 8, pp. 706-713, 2016, doi: 10.1049/iet-epa.2016.0026. [DOI:10.1049/iet-epa.2016.0026]
7. [7] M. Blodt, Granjon, P., Raison, B., & Regnier, J., Mechanical fault detection in induction motor drives through stator current monitoring - theory and application examples. France: INTECH, 2010. [DOI:10.5772/9072]
8. [8] S. C. S. Karmakar, M. Mitra, S. Sengupta, Induction motor fault diagnosus approach through current signature analysis. Springer, 2016. [DOI:10.1007/978-981-10-0624-1]
9. [9] E. Darie, "About modeling of induction motor faults," in International Conference on Electromechanical and Power Systems, Chisinau, Republic of Moldavia, 2007.
10. [10] A. Seghiour, T. Seghier, B. Zegnini, and G. Georgoulas, "Diagnosis of the combined rotor faults using air gap magnetic flux density spectrum for an induction machine," (in English), Intl. J. Syst. Assur. Eng. Manage., Article vol. 8, pp. 1503-1519, 2017, doi: 10.1007/s13198-017-0621-9. [DOI:10.1007/s13198-017-0621-9]
11. [11] S. Abdellatif, S. Tahar, and Z. Boubakeur, "Dynamic analysis of the simultaneous mixed eccentricity and broken rotor bars in induction machine based on magnetic field diagnosis," (in English), Recent Adv. Electr. Electron. Eng., Article vol. 10, no. 2, pp. 101-109, 2017, doi: 10.2174/2352096510666170425105816. [DOI:10.2174/2352096510666170425105816]
12. [12] H. Rezaei and M. J. Khosrowjerdi, "A polytopic LPV approach to active fault tolerant control system design for three-phase induction motors," (in English), Int J Control, Article vol. 90, no. 10, pp. 2297-2315, 2017, doi: 10.1080/00207179.2016.1244730. [DOI:10.1080/00207179.2016.1244730]
13. [13] A. K. S. Singh GK, "Induction machine drive condition monitoring and diagnostic research-a survey," Electr Power Syst Res 64, vol. 2, pp. 145-158, 2003. [DOI:10.1016/S0378-7796(02)00172-4]
14. [14] A. J. Allbrecht PF, McCoy RM, Owen EL, "Assessment of the reliability of motors in utility applications-updated," IEEE Trans Energy Convers EC-1, vol. 1, pp. 39-46, 1986. [DOI:10.1109/TEC.1986.4765668]
15. [15] W. W. Saad, M. A. El-Geliel, and A. Lotfy, "IM stator winding faults diagnosis using EKF," 2018, vol. 2018-February: Institute of Electrical and Electronics Engineers Inc., pp. 34-39, doi: 10.1109/ACCS-PEIT.2017.8302997. [DOI:10.1109/ACCS-PEIT.2017.8302997]
16. [16] H. Abdallah and K. Benatman, "Stator winding inter-turn short-circuit detection in induction motors by parameter identification," (in English), IET Electr Power Appl, Article vol. 11, no. 2, pp. 272-288, 2017, doi: 10.1049/iet-epa.2016.0432. [DOI:10.1049/iet-epa.2016.0432]
17. [17] R. Marino, Tomei, P., & Verrelli, C.M., Induction motor control design. London: Springer-Verlag, 2010. [DOI:10.1007/978-1-84996-284-1]
18. [18] S. Gunal, Ece, D.G., & Gerec, O.N., "Induction machine condition monitoring using notch-fltered motor current," Mechanical Systems And Signal Processing, 23, vol. 8, pp. 2658-2670, 2009. [DOI:10.1016/j.ymssp.2009.05.011]
19. [19] A. Nikranjbar, Ebrahimi, M., & Wood, A.S., "Modelbased fault diagnosis of induction motor eccentricity using particle swarm optimization," Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,, vol. 223, pp. 607-615, 2009. [DOI:10.1243/09544062JMES1113]
20. [20] W. Leonhard, "Control of electrical derives," Springer, 1996. [DOI:10.1007/978-3-642-97646-9]
21. [21] R. Marino, Peresada, S., & Valigi, P., "Adaptive input-output linearizing control of induction motor," IEEE Transactions on Automatic Control, vol. 38, 2, pp. 208-221, 1993. [DOI:10.1109/9.250510]

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.